| Minimum chamfer dimension | rmin | 2 | mm |
| Diameter lubrication hole | ds | 4.80 | mm |
| Bore diameter outer ring | D1 | 192.30 | mm |
| Width of lubricating groove | ns | 9.50 | mm |
| Bore diameter | d | 140 | mm |
| Width | B | 53 | mm |
| Basic static load rating, radial | C0r | 800,000 | |
| Limiting speed | nG | 3,450 |
| Outside diameter | D | 210 | mm |
| Basic dynamic load rating, radial | Cr | 570,000 | |
| Fatigue load limit, radial | Cur | 77,000 | |
| Reference speed | nϑr | 2,390 |
| Minimum diameter shaft shoulder | da min | 148.80 | mm |
| Maximum recess radius | ra max | 2 | mm |
| Minimum cavity diameter of the sleeve | db min | 147 | mm |
| Maximum diameter of housing shoulder | Da max | 201.20 | mm |
| Maximum diameter of shaft shoulder | da max | 155 | mm |
| Minimum cavity width of the sleeve | Ba min | 8 | mm |
