| Width of lubricating groove | ns | 6.50 | mm |
| Raceway diameter of the inner ring | d2 | 52.40 | mm |
| Minimum chamfer dimension | rmin | 1.50 | mm |
| Diameter lubrication hole | ds | 3.20 | mm |
| Bore diameter outer ring | D1 | 76 | mm |
| Maximum recess radius | ra max | 1.50 | mm |
| Minimum diameter shaft shoulder | da min | 49 | mm |
| Maximum diameter of housing shoulder | Da max | 81 | mm |
| Reference speed | nϑr | 5,500 | |
| Fatigue load limit, radial | Cur | 13,500 | |
| Basic dynamic load rating, radial | Cr | 156,000 | |
| Outside diameter | D | 90 | mm |
| Limiting speed | nG | 7,600 | |
| Basic static load rating, radial | C0r | 149,000 | |
| Width | B | 33 | mm |
| Bore diameter | d | 40 | mm |
